those window people prob left a piece of glass stuck in there somewhere.. the idiots.
just kidding wondow people... just the ones that did mine when someone dropped a rock through
left glass all over and AND if I hadn't went out when I did they would have left it there.. they said they didn't think it was working BEFORE the glass was broken and I said YES it was so they took it apart again and there was glass wedged in there.... that was the front glass the back one is the one i fixed
OK get:
1) a long strong flat screw driver
2) 2 little flat screw drivers
3) 2 pairs of needle nose pliars
4) one huge pair of pliars just in case hahhaha
5) lots of that spray on lithium grease.. I think that is what it is.. spray on but like the kind in the tube....
6) rags...lots of rags to lay parts on and to clean your hands
7) speaking of cleaning your hands get some of that go joe or gunk stuff that men use to clean the grease off the hands cause let me tell you it is n-a-s-t-y stuff hahaha
8) some of those things that pop the door thingy back on.. you know after you finish and find out the little clip things broke when you popped the inside of the door off...
9) a hammer.. cause if you do all this and it still don't work then you will want to jsut take the hammer and beat the shit out of it!!! ;D
ok ready??
no? I will wait
ready now??
ok good!
get ready and get set...GO!!!
ok get the big screwdriver and open the car door..
take the screw driver and then realize you have to unscrew the door handles off maybe so go search for a phillips screwdriver.. hahha
ok got it off yet??
I will wait...
got it now??
good!
now just sit on the cold wet ground hahaha and look in it and just stare at it for a while.. think about that hammer and wonder when to use it...
ok see the motor yet?? unplug it.. first see if the idiots plugged it back and turn on your car key... backwards so you can try it ...
nope?? then look for the screws and use the philips screwdriver and take the 3 screw out that is holding it to the door.. then think OMG!! what am i doing. hahha..
then say well it can't hurt it and that will save ont he labor charge if I do need to buy a motor.. damn thing ain't working anyways!!
ok got it off yet?? might have to twist and shove it a while to get it out..
push the button to see if it works without the gears on the window gears that way you will know if it is the motor or the window (or gears) that is jammed... or rusted.. how long did it take till the window got in ?? did it get rained on?
should i go on??
ok if the motor is not turning with it out of the door make sure it is plugged in still
ok if it is not working then take the oil and spray it all in the motor and wait a few minutes and see if it works..
If not then get the big flat screw driver and pop off the big metal cap thingy and look inside.. watch out cause there are springs in there hahhaa believe me .. I thought I would never get it back in ahhaha..
never mind just skip that step until you are brave enough to tackle the spring... instead take the screwdriver.
WAIT ... first unplug it!! and turn the key off so you won;t run the battery down hahha.
ok now unscrew the screws on the end and take them out and lay them on a rag don;t lose them or you are screwd!!
ok? pull the casing off .. try to pull the entire thing out and the gear thingy should comeo ut too.. watch out there are some little BB's in each end for some reason.... don;t lose them. I am sure they are there for some reason ;D
sorry I just have to laugh at me!! ;D
ok take it out already
look in there and spray some grease in there and then take the pliars and see if it will turn.. grease it all up really good and then stick it back in and make sure the bb's are still there.. might have to take the screwdriver and clean the rust out. I sure did.... the gears were so rusty there were chunks coming off..
ok screw it all back together plug it back in and turn the key on.. and then see if the gears go round and round!!
if not then you gotta go in deeper and do more surgury.. take a break and get a cup of coffee and yell at the cats for messing with things
and the chickens for eating the bb's I told you not to lose haha ;D
break is over
I said COFFEE not beer.. now look at you all staggering and stuff
;D
now! take the screwdriver and and pop off the big metal cap thingy off.. it will have a rubber gasket around there somewhere but don;t worry about it. cause it don;t have to come off hhahhaa.
after the cap is off then there is a lock thing on the metal bar that sticks up.. washer that is what it is .. a lock washer.. hahha take either the needle nose pliars and take it off or do it the hard way and use the screwdrivers like i tried to do
put the washer down on a rag.. don't lose it.. take a little screw driver and wedge the huge round white thigs out and try to pry the heavy looking metal thing out..
dig on in there and just take stuff out til you find the problem.
don't worry about messing it up .. if it is broke already what the hell are you going to mess up!!
good luck putting it all back together ;D
;D ;D